Article ID : 00114306 / Last Modified : 13/09/2018

Does the camera continuously adjust the focus while in Continuous Shooting or Speed Priority Continuous focus modes?

Applicable Products and Categories of This Article

When the Auto focus mode is set to AF-A or AF-C, you may be able to adjust focus while in Continuous Shooting.
Check the following since there are restrictions depending on the camera and lens.

Legend:
✔: Compatible
- : Not Compatible

  Fast Hybrid AFMount Adapter
Model NameAuto Focus Mode SettingUsing
Compatible Lens
Using
Non-Compatible Lens
Using
LA-EA1
Using
LA-EA3
Using
LA-EA2,
LA-EA4
ILCE-9AF-C✔*10✔*2✔*2✔*6✔*2
ILCE-7M3
ILCE-7RM2
ILCE-7RM3
AF-A or AF-C✔*1✔*2✔*3✔*2
ILCE-7M2AF-C✔*1✔*2✔*3 *8✔*2
ILCE-7AF-C✔*4✔*5-✔*5
ILCE-5100AF-A or AF-C✔*6✔*2-✔*2
ILCE-6000AF-A or AF-C✔*6✔*2-✔*2
ILCE-6300AF-A or AF-C✔*6✔*2✔*3✔*2
ILCE-6500AF-A or AF-C✔*9✔*2✔*3✔*2
NEX-5R
NEX-5T
NEX-6
AF-C✔*7✔*5-✔*5

 

Model NameAuto Focus Mode SettingContrast AF

Mount Adapter

Using
LA-EA1,
LA-EA3
Using
LA-EA2,
LA-EA4
ILCE-7SM2
ILCE-7S
ILCE-7R
ILCE-5000
ILCE-3500
ILCE-3000
NEX-7
NEX-3N
NEX-F3

AF-C

✔*5

-

✔*5

NEX-C3

AF-C

✔*5

-

✔*5 *11

NEX-5
NEX-3

AF-C

✔*5

-

✔*5 *12

 

Model Name

Auto Focus Mode Setting

 
DSC-RX10M4AF-A or AF-C✔*1

DSC-RX100M5
DSC-RX100M5A
DSC-RX100M6

AF-A or AF-C✔*1

 

*1 AF cannot be tracked while on Continuous Shooting in the following cases:

  • If the subject is outside the range of the phase-detection AF sensor.
  • When shooting in a dark environment.
  • When shooting with no subject contrast such as blue skies or a white wall.
  • If the aperture value is more than F8.
    For the ILCE-7M3, if the aperture value is larger than F11.

*2 Only compatible with Continuous Shooting Lo.

*3 Only compatible with Continuous Shooting Lo.
     You need to set to Phase-detection AF for AF system from the custom menu.

*4 AF cannot be tracked in Speed Priority Continuous Shooting in the following cases:

  • If the subject is outside the range of the phase-detection AF sensor.
  • When shooting in a dark environment.
  • When shooting with no subject contrast such as blue skies or a white wall.
  • If the aperture value is more than F8.

*5 Only compatible with Continuous Shooting. (You will not be able to continue to focus in Speed Priority Continuous Shooting.)

*6 AF cannot be tracked when shooting in a dark environment. You will not be able to continue to focus in Mid/Hi in the following cases. In this case, set to Lo.

  • If the subject is outside the range of the phase-detection AF sensor.
  • If the aperture value is more than F11.
  • When the system software of LA-EA3 is Ver.01

*7 AF cannot be tracked in Speed Priority Continuous Shooting in the following cases:

  • If the subject is outside the range of the phase-detection AF sensor.
  • When shooting in a dark environment.
  • If the aperture value is more than F6.3.

*8 Software Ver.2.0 or later is required.

*9 AF cannot be tracked when shooting in a dark environment. You will not be able to continue to focus in Mid/Hi/Hi+ in the following cases. In this case, set to Lo.

  • If the subject is outside the range of the phase-detection AF sensor.
  • If the aperture value is more than F11.

*10 AF cannot be tracked when shooting in a dark environment. You will not be able to continue to focus in the following cases.

  • If the subject is outside the range of the phase-detection AF sensor.
  • If the aperture value is more than F11. (AF can be tracked during Continuous Shooting if you are using Software Ver. 3.0 or later and an SEL400F28GM is attached.)

*11 Software Ver.02 or later is required.

*12 Software Ver.05 or later is required.